Concrete cutting in Sunrise Manor NV - straight, clean cuts right where you want them
Need a door through a concrete wall or a strip of slab cut out? We make straight, controlled cuts and leave the rest alone.
- Licensed and fully insured.
- Free estimates at your property.
- We reply within 1 business day.
What does concrete cutting involve, and what sets the price?
Concrete cutting in Sunrise Manor means sawing straight, controlled lines through a slab or wall with a diamond-blade saw. That lets you take out a section of driveway or patio, cut a trench, or open a door or window in a concrete or block wall without breaking up the concrete that stays.
Most calls I get start with one piece of concrete in the way, like a cracked section of driveway, a patio that needs a trench for a pipe, or a block wall where you want a door. The price turns on how many feet we cut, how thick the concrete is, whether it's a wall or a floor, and whether there's rebar inside, the steel bars that keep a slab from pulling apart. It also turns on whether you want the pieces broken up and hauled off or just cut loose. The schedule mostly waits on the scan, the water and power hookups and any permit, and I put all of it in the written quote you get after the estimate.
How we handle concrete cutting
Before we cut into a slab or wall, we want the spot scanned for cables, because what's inside concrete doesn't show from the top. We also ask early where we can hook up water and power, so nobody's hunting for a spigot on cut day. Then we mark the lines with you, set up the saw that fits the job, make the cuts and clean up the site before we leave.
A cut is often the first step of something bigger. If you're widening a drive or replacing a bad section, our concrete driveway building work picks up where the saw leaves off. If you're opening the back of the house onto the yard, concrete patio construction gives the new door somewhere to land. Either way, when we pour new concrete into a cut-out space, I'd rather spend your money digging out and packing the subgrade, the dirt and gravel the slab sits on, than on a fancy finish, because a patch on a soft base settles no matter how good the top looks.
Flat sawing for driveways, patios and sidewalks
This is the most common kind of cut, made with a walk-behind saw that rolls along the slab. It suits pulling out a cracked section, cutting a trench or squaring up an edge, and it's the one most homeowners need.
Wall sawing for new doors and windows
The saw runs along a rail bolted to the wall, which is the standard way to open a new doorway or window in a concrete or masonry wall. The rail keeps the cut straight and square, so the frame goes in without a lot of patching around ragged edges.
Concrete cutting in Sunrise Manor and who signs off on it
Sunrise Manor isn't a city of its own. The Clark County Board of County Commissioners governs it, so building permits here come from the county's Department of Building & Fire Prevention. The county issues permits for residential room additions, so if your cut is part of one, that's work it permits. Its list doesn't settle whether a cut on its own needs a permit, and that office is the place to ask. We check which office covers your address and whether your job needs a permit, and when it does, we handle the paperwork and keep you posted.
Around here the work is usually a cut through a driveway or patio slab, or a block wall opened up for a door. If the cut opens the ground, like a trench for a new pipe, the digging under it is where 811 comes in, and the state's utility regulator says that service is free and the law. We're based in Sunrise Manor and work in the cities around it, and on jobs in Henderson and Boulder City we check which office covers the address the same way.
Why Sunrise Manor homeowners call Keystone Sunrise Manor Concrete for concrete cutting
I come out to look myself
I come out to look at jobs myself, and our crew does the work with me on site. The person who measured your cut is standing there when the saw starts.
Trained on a municipal crew
I learned concrete pouring sidewalks, curbs and pads for a municipal crew, where the work got inspected and then walked on by the public every day. We've been in business since 2023, and that habit of working to an inspector's eye comes along to your job.
Licensed and fully insured
We're licensed and fully insured, so you're not taking on a crew with heavy saws and no coverage behind it. Nevada's contractors board lists diamond and core drilling as its own license classification, so it's fair to ask any cutter what they're licensed for.
On a cutting job, the thing that matters most is knowing what's inside the concrete before the blade goes in. Tell us where your cut goes and I'll come take a look.
Request a quoteGet a written quote for your concrete cut
We reply within one business day to set a time to look. The estimate is free, done at your property and comes with no obligation. I'll walk the spot, take measurements and give you a written quote that lists what's in it.
What happens after you call about concrete cutting in Sunrise Manor?
Call or send the form
You call or send the form, and we get back to you to set a time to look. Tell us whether the cut is in a wall or a slab, because that tells me what kind of job we're talking about.
I measure and write it up
I come out, measure, ask how you'll use the space and write up a quote that lists what's in it. You'll see plainly whether breaking up and hauling the pieces is included, so the total isn't a guess.
We plan the cut day
Once you say yes, we sort out any permit and get the scan done. Then we plan the cut day with you, including where we'll hook up.
We cut and clean up
I'm on site with the crew until the job's done and cleaned up. You're left with the opening or the cut you asked for, with the concrete around it untouched.
Frequently asked questions
How much does concrete cutting cost in Sunrise Manor?
Professional concrete saw cutting across the US usually runs about $3 to $10 per linear foot, and that covers the sawing, not breaking up and hauling the pieces. Reinforced or deeper slabs and wall sawing cost more per foot, and a small job may be priced by its minimum charge instead of by the foot. I'll measure your job and put your number in a written quote.
Will the concrete cutter also remove the concrete?
Not always, because sawing and removal are separate jobs, and some cutters make the cuts and leave the panels in place. Breaking, hauling and disposal can cost more than the sawing itself, so ask whether a quote includes them. Ours says so either way.
Is it safe to cut into my concrete slab?
It usually is, once you know what's inside it. Some slabs carry post-tension cables, steel cables pulled tight inside the concrete, and cutting one can damage the structure or let that force go near the people working. One scanning company advises checking the home's structural records and the surface, then having a professional scan the exact work area before any cutting, which is why we want the spot scanned first.
How do I get my house ready for a concrete cutting crew?
Plan on a water source and electricity the crew can use, because a concrete sawing trade group's specification puts those on the owner. That's why I ask about hookups at the estimate. It also helps to move cars, pots and furniture away from the cut.
Why do concrete cutters use water on the saw?
Most flat and wall sawing is done wet, because the water keeps the diamond blade cool and keeps the dust down. Expect a hose running to the saw and a wet work area while we cut.
How do I know if I can cut concrete on my own property in Nevada?
If you're improving a home on your own property that you live in, and not one you plan to sell or lease, you can apply to the Nevada State Contractors Board for an exemption under the state contractor law. The board decides whether it applies to you. If you go ahead yourself, the cable scan above still matters just as much.
Other concrete work that often follows a cut
Concrete driveway building
If the cut is making room for a wider or replaced driveway, we can pour the new section so it meets the old one cleanly and drains away from the house.
Concrete patio construction
When a cut opens a doorway onto the backyard, a new patio outside it gives that door somewhere to land, built on a base that's dug out and packed first.
Las Vegas, NV
Tell us where the cut needs to go
Call Keystone Sunrise Manor Concrete at (702) 425-1723 or use the form with the cut's location, whether it's in a wall or a slab, and any structural records for the house, so I can size up the job before I even get there.